• Help Support Hardline Crawlers :

Got me some 47s, Time for a make over

FroggF350

Well-Known Member
Joined
Jun 17, 2008
Messages
1,496
Reaction score
5
Location
Rockmart, NW GA
Before

2010-02-25132234.jpg

After
SatMar06211652AmericaNew_York2010.jpg

SatMar06211640AmericaNew_York2010.jpg

SatMar06211633AmericaNew_York2010.jpg

SatMar06211630AmericaNew_York2010.jpg

This is whats coming next
Stroked 408
2009-12-06162458-1.jpg
 
Re: Got me some 47s

I hope you plan on taking those Warn hubs off and installing Flanges
 
Re: Got me some 47s

when they break I will. It has 35 spline outters, but I know they aint gone last either. I found a set of 2.5 rocks at a good deal, but not sure if I want to build the 60 or upgrade to rockwells. :dunno:
 
Re: Got me some 47s

FroggF350 said:
when they break I will. It has 35 spline outters, but I know they aint gone last either. I found a set of 2.5 rocks at a good deal, but not sure if I want to build the 60 or upgrade to rockwells. :dunno:

Thats cool, Those tires will find the weak link for sure.
 
Re: Got me some 47s

oh yeah with the new whoompow these axles wont last long. But they will break before I replace them, I aint gonna fix what aint broke.
 
Re: Got me some 47s

gotta move 2 bars on my cage and get some limit straps. My neighbors wasnt too happy about me flexin in the ditch, but I say :flipgotcha:
e60e8c03.jpg

f7776246.jpg
 
Re: Got me some 47s

HOLY COW..........them tires & that engine , I like yo jeep a WHOLE LOT better now :****:
 
Re: Got me some 47s

zukiscott said:
HOLY COW..........them tires & that engine , I like yo jeep a WHOLE LOT better now :****:


Come on Scott, man up and put some on the Sami' :flipoff1:
 
I bought 4 new air shocks and 16 new balistic joints to 4 link it. Also gonna lower the ride height and paint it.
Somewhat of a rough draft.
4da761c0.jpg
 
Ok so its not a Mona Lisa, but it aint bad for someone who failed art. :flipper:
As far as the 60/14, im goin with rocks.
I let "someone" talk me into building a whole new tube chassis and trashing the cj.
So only thing from this I will be using is the tires, the motor and trans/t-case.
 
Glen1978 said:
Nice drawing.............LOL! Cant wait to see how the 60/14 bolt holds up.
They hold up better than what you got!!! :flipoff1:
You might want to change your POSER signature, looks you aint riddin on nuthing but frame!!! :****:
That 321 you have for sale is along the lines of what im looking for, if you were closer i might would have bought it.
 
FroggF350 said:
Ok so its not a Mona Lisa, but it aint bad for someone who failed art. :flipper:
As far as the 60/14, im goin with rocks.
I let "someone" talk me into building a whole new tube chassis and trashing the cj.
So only thing from this I will be using is the tires, the motor and trans/t-case.

Would that "someone" be Allstarbuggy, AKA David???
 
Would that "someone" be Allstarbuggy, AKA David???
oh HELL NAW. molaugh :gtfo:
I did get the jeep from him because he owed me money for a buggy I sold him, and I give him almost 12 months to pay up, that didnt happen so I collected. Labron at Cave Spring Customs is building me a new chassis. I wanted him to re-build the peiced together junky rollcage, and he talked me into building a new rig.
 
Blah, blah, blah. Naw man I got a little Yota truggy on one tons, linked front and rear/airshocks/full hydro, dual cases with 4.7's in the back case sittin on some fotys. Just yanked all the EFI bullshit off and going with the pane. It works pretty good. Just dont got the whoopow that a V8 does. Thought about moving all the running gear to the 321 minus the Yota engine/tcases and dropping a 383 stroker/TH350/Atlas. Who knows....
 
Back
Top