Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
No I never check for runout after the first rim.Okay so this has been a good/busy week for me. I got the rear axle back in the jeep, bled the brakes, filled the diff with oil and then installed the rear tires.Now before I could install the tire on the front I need to fix my track bar. Last year I had ripped the track bar bracket off the axle, and when I redid the new bracket I had moved it over a little to keep it away from the air bag. Will in doing that I now needed to shorten my track bar.So cut the old weld off and take the insert out.cut an inch off the DOM tube.and put it back together.Put a new weld to hold it togetherand a little paint.Jack the front end up and mount the tires!!! The front is on the ground again but I left the rear on stand so I could run the new gears for a little while.
No I never check for runout after the first rim.
Okay so this has been a good/busy week for me. I got the rear axle back in the jeep, bled the brakes, filled the diff with oil and then installed the rear tires.
Now before I could install the tire on the front I need to fix my track bar. Last year I had ripped the track bar bracket off the axle, and when I redid the new bracket I had moved it over a little to keep it away from the air bag. Will in doing that I now needed to shorten my track bar.
So cut the old weld off and take the insert out.
cut an inch off the DOM tube.
and put it back together.
Put a new weld to hold it together
and a little paint.
Jack the front end up and mount the tires!!! The front is on the ground again but I left the rear on stand so I could run the new gears for a little while.
