• Help Support Hardline Crawlers :

Reply to thread

Got the truss welded down then started on the ram. I shortened both links and rewelded them to the correct length. Then built the mount for the ram and got it welded to the truss.

I'm going by the local PnP tomorrow and hopefully score a steering cooler so I can finish plumbing the steering system.


Here is the ram mount and I checked to make sure it was level as well as the truss. All is good.


Spent the early evening at the new house grilling out while the girls painted some more of the inside. Then shot off some big fireworks before returning back to this house and working on the YJ.


Finished making the link tabs..

 Then tacked the links into place temporarily and will get started on the uppers today and hopefully get the coilovers installed so the front will be done enough for transportation,.


Here are the brackets I made for frame side out of 2x4x1/4 wall cut and drilled. Samke material will be used for the frame mounts on the upper links.


Latest posts

Back
Top