Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Sometimes you can take a good center punch, and just break the E-Z out and/or drill bit into small pieces that can be fished out with a combination of pick, magnet, and air pressure. (Most cutting tools are brittle)If they wont break up or are too small to get a center punch in there, I have used the small 1/8" carbide cutters in a Dremel to cut out the center of a few. Takes a little while depending on how deep they are, but is definitely an option.
Sometimes you can take a good center punch, and just break the E-Z out and/or drill bit into small pieces that can be fished out with a combination of pick, magnet, and air pressure. (Most cutting tools are brittle)
If they wont break up or are too small to get a center punch in there, I have used the small 1/8" carbide cutters in a Dremel to cut out the center of a few. Takes a little while depending on how deep they are, but is definitely an option.
