lockers gears recovery

[angelfly]

So since i am claiming insurance on all my stolen tools and such i decided i would be kinda sneaky and use $600 and get some gears and lockers. I orders a complete recovery kit today from 4 wheel parts along with new steering stabilizer.
Heres what i am odering for lockers and gears with this work or should i try a different setup and cheap is my friend here
Remove ID Product Qty Price Total
Remove ID Product Qty Price Total
Item 18 LOCKRIGHT POWERTRAX DANA 44 $279.00 $279.00
Item 159 4.88 RING AND PINION GEARS-DANA 60 $199.00 $199.00
Item 410 SPINDLE NUT KIT DANA 60 $17.00 $17.00
Item 418 YOKE-DANA 60 PINION-1350 $69.00 $69.00
Item 679 COVER-INSPECTION D60 D70 THICK $24.99 $24.99


Sub Total: $588.99
Handling: $10.95

Grand Total: $599.94

 

[Binder]

So your only going to re gear one axle? What ratio is the other axle?

 

[angelfly]

no 4.88's for both damn glad i didnt order that yet thank you for catching that i would have been really unhappy bout that one. I am doing 4.88's front and back a trac loc in the front and a rear spool

 

[NotMatt]

On your list it says Powertrax Lockright... that's not a trac-lock, FYI.

Also, you're going to need a setup kit for both axles with bearings, shims and such... also, I don't see the D60 spool on your list, unless you already have it. Also, why the 1350 yoke for the D60?

IMO, if you have a cover already for the D60 and your current driveline works... I would skip the "inspection cover" and the "1350 yoke", and add in the master install kits for both axles, a R&P for the rear, and a spool for the rear (if you don't have it already).

Next up... who's going to do the gear setup? Better figure that into the price too... for either of those axles, I would charge a person about $150 apiece if they brought me ALL the parts and the stripped down housing with the stock carrier still installed. Lots of places will charge more...

 

[Outback]

So since i am claiming insurance on all my stolen tools and such i decided i would be kinda sneaky and

Sneeeky... you just posted it for the world to see!:flipoff:

I will advise NOT to spool the rear unless you never drive on pavement, or like broken D60 parts.
Just drop a 'Troit in it or a lock-rite.
Or better still pick up a 14-Bolt 'Troit that and sell that Ford 60 to someone for $500!
14-bolts are all but free, gears cost the same, Troits are dirt and you end up stronger.

Justsomeonewho's BTDT.

 

[angelfly]

lol my insurance guy said i could go ahead do that it didn't matter really what i end up spending it on i guess. I just said that dont know why really.

 

[angelfly]

So here is my order i am placing today if u guys ok it first.
Remove ID Product Qty Price Total

5.13 GEARS (5.13) YUKON DANA 44 $159.60 $159.60
LOCKRIGHT POWERTRAX DANA 44 $279.00 $279.00
INSTALL KIT-DANA 44 MASTER INSTALLATION KIT $81.00 $81.00
5.13 THICK RING & PINION GEARS GM 14T 14 BOLT $189.00 $189.00
INSTALL KIT-14T 88 AND OLDER 4 RIB $129.00 $129.00
SPOOL 14 BOLT 10.5" CORPORATE G.M. $259.00 $259.00
DANA 44 TRAIL DEFENSE THICK COVER $109.00 $109.00

Sub Total: $1,025.60
Handling: $10.95
Grand Total: $1,036.55

 

[crash2]

Personally I would save your $$$ for that other possable rig. But thats just me.

 

[angelfly]

i think i'm going that way but i think those are the axles i am using for the buggy my uncle is mass skilled at narrowing housing's so i want to go like 3/4ton running gear

 

[crash2]

i think i'm going that way but i think those are the axles i am using for the buggy my uncle is mass skilled at narrowing housing's so i want to go like 3/4ton running gear

iF YOUR GOING to spend coin---wait/save up for 1 ton stuff....

I played that same game and now I have axles that will last a long time (60's)

 

[NotMatt]

5.13 THICK RING & PINION GEARS GM 14T 14 BOLT $189.00 $189.00
INSTALL KIT-14T 88 AND OLDER 4 RIB $129.00 $129.00
SPOOL 14 BOLT 10.5" CORPORATE G.M. $259.00 $259.00

Thought you had a 60 rear end... if so, these three items won't work. Also, you might want to verify that your rear axle is really a 60 and not a 61 before you order (if it is indeed a Dana and not a 14 bolt), because some of the gears won't work in a 61. Check Pirate4x4.com's tech section for the Dana 60 info and how to identify which is which.

 

[angelfly]

Well i know i have a dana 60 for sure but those are from my yota that i am building. fullfloater in the rear and a 44 or 60 in the front whatever i can afford i guess

 

[TacOffRd]

I have a Dana 44 30-spline lockright for sale in the classifieds section if you are interested.

 

[angelfly]

how much can't find the listing

 

[TacOffRd]

Asking $235 + shipping.