Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
In my opinion, no and the reason why is that the outside cover bolts draw the hub out against the outer holding ring anyway. It is sandwitched solid and if you are using the inner snap ring (You should) it will draw the stub axle out against the inner seal too. There is no need to duplicate things.
In my opinion, no
and the reason why is that the outside cover bolts draw the hub out against the outer holding ring anyway. It is sandwitched solid and if you are using the inner snap ring (You should) it will draw the stub axle out against the inner seal too. There is no need to duplicate things.
