Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Ok so I have been doing a little reading and talked a little with pokey a while back on this and the motor will be ready on sat to stuff back into the rig... So since I am redoing the pedal assy on gibby's rig--and the fact his lil boy is going to be driving it--it only makes sense to swap the clutch to hydro. Now my plan was going to be simple and use what I have used on my 4.3 conversions-- fj40 master/slave and just make a bracket for the slave (stock trans). Now I know this isn't rocket science and I pretty much know what i am doing--but I figured I would ask if there was a better combo out there to use.. Thanks for any input...
Ok so I have been doing a little reading and talked a little with pokey a while back on this and the motor will be ready on sat to stuff back into the rig...
So since I am redoing the pedal assy on gibby's rig--and the fact his lil boy is going to be driving it--it only makes sense to swap the clutch to hydro. Now my plan was going to be simple and use what I have used on my 4.3 conversions-- fj40 master/slave and just make a bracket for the slave (stock trans). Now I know this isn't rocket science and I pretty much know what i am doing--but I figured I would ask if there was a better combo out there to use..
Thanks for any input...
