Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
How to make the floor shifter sandwich:Take a 5 speed floor plate and use the outline of it to make a cardboard template of the outline. Then mark the bolt holes and cut out an area to clear the auto shifter arm and pivot. Transfer the holes onto the genII floor plate. Drill bolt holes.Cut out the hole to clear the shifter arm. Put 2 clips into the top holes you drilled for the auto floor plate retaining bolts.put longer bolts through the rear holes of the floor plates... this goes through the auto shifter floor plate, and the genII floor plate, into the original clips. Then bolt the top bolts of the auto shifter into the clips you put into the genII plate. Then put in the bolts for the genII's original top holes.you will also need to drill though the bottom plate for the shifter bezel mounting screws.
How to make the floor shifter sandwich:
Take a 5 speed floor plate and use the outline of it to make a cardboard template of the outline. Then mark the bolt holes and cut out an area to clear the auto shifter arm and pivot. Transfer the holes onto the genII floor plate. Drill bolt holes.
Cut out the hole to clear the shifter arm. Put 2 clips into the top holes you drilled for the auto floor plate retaining bolts.
put longer bolts through the rear holes of the floor plates... this goes through the auto shifter floor plate, and the genII floor plate, into the original clips. Then bolt the top bolts of the auto shifter into the clips you put into the genII plate. Then put in the bolts for the genII's original top holes.
you will also need to drill though the bottom plate for the shifter bezel mounting screws.
