Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
And figured it was time to get the shifter assy done up. For now I am leaving the stak case shifters alone and only bent the doubler shifter enough to get it thru the floor--will fit the shifters to joe once the floor is done and a seat back in.. I had to notch the floor behind the origional shifter hole and under the floor to clear the stak case shifter/shifter rods. Plus I had to slit/bend the floor at the new hole hole (showed joe a little trick :awesomework: ) So since the t-case was now in the weight distribution was done which means I can now do the rear shackles. My setup ended up being right on the money for the shackle length and started building and they are almost done...
And figured it was time to get the shifter assy done up. For now I am leaving the stak case shifters alone and only bent the doubler shifter enough to get it thru the floor--will fit the shifters to joe once the floor is done and a seat back in.. I had to notch the floor behind the origional shifter hole and under the floor to clear the stak case shifter/shifter rods. Plus I had to slit/bend the floor at the new hole hole (showed joe a little trick :awesomework: )
So since the t-case was now in the weight distribution was done which means I can now do the rear shackles. My setup ended up being right on the money for the shackle length and started building and they are almost done...
