Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Ok so the next thing I decided to tackle was getting the rear end done or close to it...So I finished setting the rear housing where I wanted it(was off 1/8"--that kills me,lol) and set the rear u-joint angle. At the same time I figured out where I wanted the track bar mount at. Tacked it all into place and dropped the rear diff out and welded it all up. At the same time I cut them LONG u-bolts down and put the brake hoses on and secured them to the spring plate. So as for the rear end all thats left is the track bar and brake lines(shocks wil be after I am able to drive it and ramp it)
Ok so the next thing I decided to tackle was getting the rear end done or close to it...
So I finished setting the rear housing where I wanted it(was off 1/8"--that kills me,lol) and set the rear u-joint angle. At the same time I figured out where I wanted the track bar mount at. Tacked it all into place and dropped the rear diff out and welded it all up. At the same time I cut them LONG u-bolts down and put the brake hoses on and secured them to the spring plate. So as for the rear end all thats left is the track bar and brake lines(shocks wil be after I am able to drive it and ramp it)
