My new TrailGear rearend and fourlink truss

[Mark m.]

I needed a new rear housing for my buggy so I got the new TrailGear housing and 4 link truss. If you need to replace your rear housing on your toyota like I did I think this is the way togo. This thing is way beefy compaired to the stock one and the price is hard to beat also and its made in the USA.
A few pics of old and new and a couple of my winter project.

 

[Mark m.]

Acouple more pics

 

[crash2]

Wow--you broke that one good mark :awesomework:

 

[JOOP]

Looking good :awesomework:

 

[heep70]

Geez, looks a little bent. :redneck:

 

[sarg]

looks sick Mark,

trail gear housing v6 third arb 5.29 gears w/ soild spacer full float w/ moser cromo shafts arp studs disc brakes......................................
I dont think you can build a toy rear end any stronger

 

[zig80toy]

Damn, sweet setup man:awesomework:

 

[Money Mark]

You cheap skate. :looser: Where'd you get those axle brackets? :; Looks like it needs more triangularation. :redneck: You sure that thing's going to stay together? :eeek: Why don't you just do a D60 and be done with it? GOD you're stupid! :kissmybutt:

Can I ride with you when its done?

 

[TOPWOP]

You cheap skate. :looser: Where

 

[Berne]

from the looks of the old one.....


you should put a back-brace on the new one...

 

[Not Jobless]

Is it bowed with the bearing ends rearward or forward?

 

[Mark m.]

Is it bowed with the bearing ends rearward or forward?

Both ends are bent back and one side is bent up. I had to use a BFH to get the axles out.
I'm a little dissapointed that you didn't say something like its just a POS toyota any who cares.

 

[Fullywrecked]

Both ends are bent back and one side is bent up. I had to use a BFH to get the axles out.
I'm a little dissapointed that you didn't say something like its just a POS toyota any who cares.

LMFAO:haha:

 

[rooinater]

:worship: :worship: :011: :011: envy...

 

[Not Jobless]

Both ends are bent back and one side is bent up. I had to use a BFH to get the axles out.
I'm a little dissapointed that you didn't say something like its just a POS toyota any who cares.

Had the same problem with my nine, BFG and prybar to get'm out. Except the bearing ends were bent forward, I'm guessing from the torque.

Sorry to disapoint ya :awesomework:

Maybe next time :fawkdancesmiley:

 

[MIG'DHORSE]

pretty sweet. is that a TG 4link bracket? ive never seen that. ive heard theyre trying to make a front housing too in the future.awesomework:

 

[Money Mark]

I'm going to be that guy for second. I think you should bend up some tube to support the front and rear "flenders".....like in Old Blue.:awesomework:

 

[Bunk1]

Thats a bent barq's axle right there

 

[stealthrunner1]

:haha: :haha: :haha: Toybug is so funny:fawkdancesmiley: :fawkdancesmiley: :haha: :haha: :haha: Can't wait to drop by and see what kind of trouble you've been getting yourself into mark m.:corn: :corn: :corn:

 

[Mark m.]

pretty sweet. is that a TG 4link bracket? Ive never seen that. Ive heard there trying to make a front housing too in the future.awesomework:

Yes its a TG 4 link truss made to fit the new housing. From what I know they are making a front housing that will be 3" wider than stock.

I'm going to be that guy for second. I think you should bend up some tube to support the front and rear "fenders".....like in Old Blue.:awesomework:

I think to go along with your new burrito cooker you should add some dingle balls, curb feelers and maybe a plastic Jesus on the dash.