Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
The water for the vaporizer just has to be at room temperature to vaporize the fuel. If there is a problem with water flow it will usually make the vaporizer get really cold or even freeze it up. Since you said you backed it out and it died, check your coupling on your tank to make sure it is screwed in fully and also pull it loose from the tank to make sure you do not have an extra washer stacked up inside it. That will let just enough fuel flow to start and idle but little else. Also check and see where the vacuum for the lockoff is connected. It needs to be connected to a port on the mixer and not anywhere on the manifold. Check those things out and give me a call if you still have problems.Buddy GamelPrecision Sales & Service, Inc.451 64th Place SouthBirmingham, Ala. 35212877-403-7827205-591-2267, faxbgamel@alternatefuel.combgamel@workhorseservice.comwww.alternatefuel.comwww.workhorseservice.com
The water for the vaporizer just has to be at room temperature to vaporize the fuel. If there is a problem with water flow it will usually make the vaporizer get really cold or even freeze it up. Since you said you backed it out and it died, check your coupling on your tank to make sure it is screwed in fully and also pull it loose from the tank to make sure you do not have an extra washer stacked up inside it. That will let just enough fuel flow to start and idle but little else. Also check and see where the vacuum for the lockoff is connected. It needs to be connected to a port on the mixer and not anywhere on the manifold. Check those things out and give me a call if you still have problems.
Buddy Gamel
Precision Sales & Service, Inc.
451 64th Place South
Birmingham, Ala. 35212
877-403-7827
205-591-2267, fax
bgamel@alternatefuel.com
bgamel@workhorseservice.com
www.alternatefuel.com
www.workhorseservice.com
