Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
BigIron is correct, preparation will make the difference. Also before you apply the material make sure you take some type of solvent to get the oils & debris off, that is where alot of the prep work comes in handy....Also the material you buy in a can vs. the stuff linex uses is different, the stuff linex uses is dispensed using a mixed metering system for critical mixture ratios. Also when linex sprays on their liners the material is coming out of the gun @ roughly 170 degrees, the material dries almost instantly.The stuff you get in the can takes a little while to dry which is caused by the difference in material ratios. Even though it feels dry to the fingers doesnt mean its 100% cured, that is why whenn you get it done @ linex they tell you not to put anything on it for like 48 hours.:awesomework: I think the colored linex looks like junk kinda but the black does not look bad on the outside of vehicles i think even when its been pressure washed after a good day in the trails. Friend of mine did it on his toy and it held up pretty good.
BigIron is correct, preparation will make the difference. Also before you apply the material make sure you take some type of solvent to get the oils & debris off, that is where alot of the prep work comes in handy....
Also the material you buy in a can vs. the stuff linex uses is different, the stuff linex uses is dispensed using a mixed metering system for critical mixture ratios. Also when linex sprays on their liners the material is coming out of the gun @ roughly 170 degrees, the material dries almost instantly.
The stuff you get in the can takes a little while to dry which is caused by the difference in material ratios. Even though it feels dry to the fingers doesnt mean its 100% cured, that is why whenn you get it done @ linex they tell you not to put anything on it for like 48 hours.:awesomework:
I think the colored linex looks like junk kinda but the black does not look bad on the outside of vehicles i think even when its been pressure washed after a good day in the trails. Friend of mine did it on his toy and it held up pretty good.
