okay what now?

[spidertoy]

what controller should I get? and I know I need a 55-65 turn lathe motor, and a pede tranny, what else? need to start my list for parts, cause I got hooked up
:cheer: thanks doug, I owe ya one:beer: anyways I need to know what to get now

 

[VMGontheRocks]

Get a nice one. Like a Airtronics Mx-3, Spectrum etc.

 

[spidertoy]

yeah but how much are those ones, can I find them on ebay for 20$?

and what about servos? and yadda yaddda and so on

 

[VMGontheRocks]

Oh thoses are very expensive. Servo you want the Hitec 645MG. I have a simple AM Radio that I could sell ya for $15.

 

[spidertoy]

sweet, that would be awesome, so where do I wanna spend the coins? just the motor and tranny? or???

 

[Dude]

don't cheap out, start with a JR XR3i you wont be disappointed.

or get one like Kash has if money is tight.

speed control, go Tekin rebel 2

servo, a 645MG will work, it's just not my flavor, my servo is spendy but I compete



I have a brand new 55 turn for ya @ $20.

need a chassis?? I have a new SW2 for $50, that's $15 off, never ran.

I also have some nice shocks off a Max that are not the plastic ones for $40 new.

I also have 2 1700 Nicads that will work good for what you will be doing and those I'll sell real cheap at $25 for 2. They have Deans plugs, ready to go.

I am needing to get rid of this stuff and it is yours FIRST to buy, or it is all going up for sale tomorrow.

I also have link material for ya so you can make your own links, Kash can show ya that too, $20 and it is nice stuff, you will have more than enough material on that.

so don't ask people untill it goes there, I am doing the guy a favor, he fights for the right to wheel. :;

 

[VMGontheRocks]

I would agree with Doug. Pony up the cash for the better equipment in the long run you will be happy.

 

[spidertoy]

believe me I have always been one to "get what I pay for" I buy high end tools cause I know that they will last and workd well, I also wanna do it right the first time, but just need to know what kinda damage I am looking at, to preface this I am not looking to compete (yet anyways) just play around with crash and have some fun around the house :redneck:

 

[spidertoy]

oh yeah, doug I will take that motor, and I need to actually open the box to see what else I need, I havent opened it yet due to knowing that if I did, I wouldnt get anything else done :redneck: till it was finished

 

[VMGontheRocks]

How about this get the JR XS3 from this guy for $110.
http://www.affordablenitrotech.com/community/index.php?showtopic=5917
You might have to register. The guy selling it is a pretty cool.

 

[Dude]

believe me I have always been one to "get what I pay for" I buy high end tools cause I know that they will last and workd well, I also wanna do it right the first time, but just need to know what kinda damage I am looking at, to preface this I am not looking to compete (yet anyways) just play around with crash and have some fun around the house :redneck:

what I listed is not a compete only stuff, the chassis is a good one and the other stuff is a good deal if you ask around.

I have had the extra stuff for awhile, I am just going a different route with a new National rig for Moab.

Trust me Don, it is good deals. :;

Unless Kash is going to hook ya up, I understand, but with a SW2 you could spank Mike all day long. :haha: :haha:

sorry Mike, had to do it. :haha:

 

[Dude]

oh yeah, doug I will take that motor, and I need to actually open the box to see what else I need, I havent opened it yet due to knowing that if I did, I wouldnt get anything else done :redneck: till it was finished

motors yours, get the chassis, you won't regret it and it is a new one, not the one I run now but is the same thing with out the link mounts. They are $65 new.

the shocks are like what you seen on mine are also new, the only thing used is the battery's they are the same as Mikes but flat like mine and you can put them were they should be, I hate to say it but my rig would kill Mikes.

want to be the man?? :haha:

I don't need this stuff, just trying to get you into a crawler for cheap.

 

[VMGontheRocks]

Or you could build a stick TLT. But I doubt that is what you want.

 

[spidertoy]

well lemme think about it, I will let you know at goldendale, I agree that it is best to pay the extra to do it right, just more needing to know what kinda damage I am gonna do

 

[spidertoy]

how about a jr xr2i on ebay for $3.25 plus 8$ for shipand handle? that a good deal?

 

[VMGontheRocks]

JR XR2i are AM if I were you I would still get the XR3i. You could get both too.

 

[spidertoy]

which do you have for sale?

 

[VMGontheRocks]

I don't have one for sale. A guy I know on another forum has the JR XR3i for sale.

 

[spidertoy]

OIC that makes sense, did you post a link? if so I am wee todd dead, and didnt see it

 

[spidertoy]

alrigth I have an idea of how much damage I am gonna do, except for a couple of parts, such as servos, and pede tranny