Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
My version. I Used 1.75" welded to the dash bar. The 1.5" for the t handle. Both .120, so the 1.5 fits snug in the 1.75 after some flap disk work, but no rattles or movement. Has various holes drilled so its adjustable, all the way in, its easy to climb in and out, then when you are in, slide it back towards you. Used a 3/8" tractor pin from the tractor pin store I.5" tubing was all I had, which is too big for Moto grips, so I weldered iin some ends from ballistic, but after paint its pretty damn smooth and not bad to hang on to.
