Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
arent there two different lengths of ears for toyota shaft flanges/slipyolk. one will tolerate more angle than the other.stick a 4-6 degree shim in there and it should work great. 4 if its a driver and 6 if its a wheeler. I have only used billit steel shims and they work great, I get a longer pin and bolt them right to the pack. that way the head sticks all the way into the perch.:awesomework: some steel shims have a larger hole so the pins head goes through the shim then the perchuke: , I take the large hole style and hammer a 7/16 nut through till flush , weld, grind. then a 3/8 spring pin fits tightly through and the shim can be bolted to the spring pack
arent there two different lengths of ears for toyota shaft flanges/slipyolk. one will tolerate more angle than the other.
stick a 4-6 degree shim in there and it should work great. 4 if its a driver and 6 if its a wheeler. I have only used billit steel shims and they work great, I get a longer pin and bolt them right to the pack. that way the head sticks all the way into the perch.:awesomework:
some steel shims have a larger hole so the pins head goes through the shim then the perchuke: , I take the large hole style and hammer a 7/16 nut through till flush , weld, grind. then a 3/8 spring pin fits tightly through and the shim can be bolted to the spring pack
