Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Well, I am missing one dowel pin on the Bell housing. But I align it perfectly and will put the dowel in Monday... Its all Bolted up with Red Lock Tight! Now I need to put in the new motor mounts and Throttle body and wiring harness on tomorrow... At this moment, I have alittle problem with the transfer case. The one I got from Kelly is a 5 bolt NP231C and the tranny has a 6 bolt Adapter on it.....Any advice?ThanksAnthony
Well, I am missing one dowel pin on the Bell housing. But I align it perfectly and will put the dowel in Monday... Its all Bolted up with Red Lock Tight! Now I need to put in the new motor mounts and Throttle body and wiring harness on tomorrow... At this moment, I have alittle problem with the transfer case. The one I got from Kelly is a 5 bolt NP231C and the tranny has a 6 bolt Adapter on it.....Any advice?
Thanks
Anthony