Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Well I took the stock exhaust flange and cut the pipe off right where it necks down. I then welded a short piece from that and pointed it right against the motor. I then took and cut off the exhaust bung and welded that to the new piping. The person we got the motor from had cut the o2 sensor wires for some dumb reason--so I had to fix that and decided to wrap it in heat tape to be on the safe side. I will be sending the rig up north to randy's exhaust---he does most of my rigs and been very happy with his work...
Well I took the stock exhaust flange and cut the pipe off right where it necks down. I then welded a short piece from that and pointed it right against the motor. I then took and cut off the exhaust bung and welded that to the new piping. The person we got the motor from had cut the o2 sensor wires for some dumb reason--so I had to fix that and decided to wrap it in heat tape to be on the safe side.
I will be sending the rig up north to randy's exhaust---he does most of my rigs and been very happy with his work...
