Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
So at this point it was time to pre-plan and get a rough idea of how I was going to do the lines to the rear radiator. After some looking around I finally came up with the plan to use 1 1/4" rigid copper tubbing. Now the outlets on the motor are 1 1/2 so its dead nuts on for the copper tubing. Now my first thing was to figure out what I was going to run for the hoses from the motor to the tubing. Well after some talking with 4RnrRick and a picture he sent me of the stock taco radiator hoses--I figured I would give that a shot. So I got an upper radiator hose--I looked at it and it was dead nuts on---cut it right in half and now I have both hoses I need.
