Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Here is at the frame rail. I tried to get them up as high as I could on the rails and they fit the contour perfectly.. Here you can see why it went slow---I found that bending the material is slow and I had to move the tubing into 5-6 different positions to get a good bend--otherwise it would start to kink and fold on the under side. Now my origional plan was to keep the tubing along the frame rail--but it had dawned on me I still need to do the shackle mounts and they will be thru the frame so I had to dive the tube up and out of the way. Now my origional plan was one piece of tubing from one end to the other. But once I started building it--I relized I would not be able to get the long piece out. So I had to make a parts run anyways so I was able to find some straight pieces of radiaror hose..
Here is at the frame rail. I tried to get them up as high as I could on the rails and they fit the contour perfectly.. Here you can see why it went slow---I found that bending the material is slow and I had to move the tubing into 5-6 different positions to get a good bend--otherwise it would start to kink and fold on the under side.
Now my origional plan was to keep the tubing along the frame rail--but it had dawned on me I still need to do the shackle mounts and they will be thru the frame so I had to dive the tube up and out of the way.
Now my origional plan was one piece of tubing from one end to the other. But once I started building it--I relized I would not be able to get the long piece out. So I had to make a parts run anyways so I was able to find some straight pieces of radiaror hose..
