Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Ok---now its down to the point of getting the small stuff done on the rear (stuff thats gotta be done before I can tear the back apart to finish welding and paint). Since stuff will be stored behind the fuel cell--figured I would make it so jack could. I just happpen to have some expanded metal laying around from when I built my rig. I figured out where the reservoirs for the coilovers will sit. Now one thing I am contiplating--since the cooling fan is a puller--its going to pull hot air onto the fuel cell--so I was thinking about taking some sheet metal and making a barrier in the front of the fuel cell( like 1/2" from the tank) to help shield that hot air. But not 100% on that yet....
Ok---now its down to the point of getting the small stuff done on the rear (stuff thats gotta be done before I can tear the back apart to finish welding and paint). Since stuff will be stored behind the fuel cell--figured I would make it so jack could. I just happpen to have some expanded metal laying around from when I built my rig.
I figured out where the reservoirs for the coilovers will sit.
Now one thing I am contiplating--since the cooling fan is a puller--its going to pull hot air onto the fuel cell--so I was thinking about taking some sheet metal and making a barrier in the front of the fuel cell( like 1/2" from the tank) to help shield that hot air. But not 100% on that yet....
