Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
That looks normal. Just make sure when reinstalling it that the idle screw goes inside that bend and not on top of it. You might want to check the mixer housing for excessive wear. With the air/gas valve in the down position see if if will move sideways in the housing. There is only about .002" clearance between the air/gas valve and housing so if you can see it move it has too much clearance. This can make it hard to turn and usually run rich. There is no fix for a worn housing other than replacing it.
