Question: Toy with 5.71

[Nyde85]

I got a line on a V6 third with Yukon 5.71 with a Detroit and another 4banger third with 5.71 open.

Both are solid collar setup by a shop in Cali.

I current am running 38.5 TSL Sx's on 4.10s I know i need gears.

I am just going to blow up these thirds with the 5.71's. I am not exactly light on the throttle.

Were talking about $750 here what you guys think?

Nyde

 

[darius]

I got a line on a V6 third with Yukon 5.71 with a Detroit and another 4banger third with 5.71 open.

Both are solid collar setup by a shop in Cali.

I current am running 38.5 TSL Sx's on 4.10s I know i need gears.

I am just going to blow up these thirds with the 5.71's. I am not exactly light on the throttle.

Were talking about $750 here what you guys think?

Nyde

Pull the 5.71's immediately, sell them and buy 4.88's or 5.29's. At any rate, it's not bad with only the detroit and 3rd.

 

[ToyZuki]

I wouldnt waste the money on 5.71's. Invest in the 5.29's from the get go. I know a guy thats got 5.71's that he cant give away cause everyone knows their for kirb hoppers with a light foot. You'll end up buying the 529's and for $750 I'm sure you could find a set of r/p and have em installed later or do it yourself.

 

[no excuses]

I wouldnt waste the money on toyota axles. Invest in the 60's or duece and a half from the get go. I know a guy thats got toyota axles that he cant give away cause everyone knows their for kirb hoppers with a light foot. You'll end up buying the 60's or duece and a half. I'm sure you could find a set and have em installed later or do it yourself.

fixed it for yah :fawkdancesmiley: :haha: :haha:

 

[Snowrunner]

We have a few guys around here that run them with 38's pretty hard and they have held up fine. Id say get the diffs and if something does break replace them with what you want.

 

[mudmaster]

Check this out
www.gearinstalls.com/410suck.htm