• Help Support Hardline Crawlers :

Rebuildable joint identification

  • Thread starter Thread starter rednecklights
  • Start date Start date
R

rednecklights

Guest
I have 2 rebuildable joints that need rebuilt. I didn't buy them new so I'm unsure of the brand is there an easy way to identify them ?

Here is a picture, terrible but I was in a hurry.

405e68e18bb2d20a7de469c5db1e1c53.jpg


89328f0cd5d80c0d4dbe0d908cd1f827.jpg



Jon Piper
 
Probably a jonny joint need to take it apart to see the bushings to be sure but that is what I would lean towards
 
Take that junky ass thing off and put a heim in its place! When I first built my junk, that's all I had, it seemed about every other ride they were so loose and sloppy, I hated mine!
 
zukimaster said:
Take that junky ass thing off and put a heim in its place! When I first built my junk, that's all I had, it seemed about every other ride they were so loose and sloppy, I hated mine!
X2 I prob got some used 1.25's we can prob work out a trade on somethin???
 
zukimaster said:
Take that junky ass thing off and put a heim in its place! When I first built my junk, that's all I had, it seemed about every other ride they were so loose and sloppy, I hated mine!

x3 I had a full 8 of them seize up.
 
That looks to be one of the rough country joints I've got a bunch of them somewhere. They are junk we used some on a 800 rzr an they wouldn't even hold up.
 
zukimaster said:
Take that junky ass thing off and put a heim in its place! When I first built my junk, that's all I had, it seemed about every other ride they were so loose and sloppy, I hated mine!
That's one joint I wouldn't even touch.. Yikes. maybe the pic was at bad angle. Haha. Piper only u would try to rebuild somthin like that on a fancy new buggy like u got. Haaa!! U turd. Just put a torch to Em. And personally I say **** REBUILDABLE .. But hell Im just the guy with 14 of them Fukers. They blow.
 

Latest posts

Back
Top