Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I think the bulb socket on the lights is moulded into the backing plate of the light, so you need to cut out the old one, and JB weld in some kind of new socket (which you can buy at an autoparts store), then wire it all up. I thought about doing this too since I have some spare corner lights. I probably should now that Im thinking about it since I dont have front turn signals now...~T.J.This should get you started, same basic concept...http://www.4x4wire.com/toyota/tech/tacoma_turn_signal/
I think the bulb socket on the lights is moulded into the backing plate of the light, so you need to cut out the old one, and JB weld in some kind of new socket (which you can buy at an autoparts store), then wire it all up. I thought about doing this too since I have some spare corner lights. I probably should now that Im thinking about it since I dont have front turn signals now...
~T.J.
This should get you started, same basic concept...
http://www.4x4wire.com/toyota/tech/tacoma_turn_signal/
