Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I like to use 3rd gen rears up front just due to their length of 51". They are the same as earlier rears but with 4" added to teh back side of the springs. I mount the hanger far enough forward that the front bolt is about 1" in front of the frame. Then I drill teh perches 1 3/8" back to move the axle a bit farther. You may not need to go to such lengths but I don't think you are planning on running 44's on 1" lift spirngs either.... The shackle tube goes in teh stock spot but I move them up about 2" higher than everyone else. That allows for a better castor angle and no long shackle hanging under the frame.
