J Jay1 Well-Known Member Joined Jun 11, 2006 Messages 142 Reaction score 0 Mar 10, 2007 #1 How do I check to see if they work on a warn winch?
B blackcj71 Well-Known Member Joined Mar 27, 2006 Messages 1,509 Reaction score 0 Location Kirkland Mar 11, 2007 #2 Hook up your positive/negative for the winch then hold switch either direction and check to see if power is switching on the solonoid. Both big terminals on the solonoid should power up.
Hook up your positive/negative for the winch then hold switch either direction and check to see if power is switching on the solonoid. Both big terminals on the solonoid should power up.
J Jay1 Well-Known Member Joined Jun 11, 2006 Messages 142 Reaction score 0 Mar 11, 2007 #3 It dosent do any thing.
T TDW Well-Known Member Joined May 12, 2006 Messages 250 Reaction score 0 Mar 11, 2007 #4 Power on one of the small terminals, ground to the other then check the resistance between the two large terminals. Should be around 1 ohm or less.
Power on one of the small terminals, ground to the other then check the resistance between the two large terminals. Should be around 1 ohm or less.
J Jay1 Well-Known Member Joined Jun 11, 2006 Messages 142 Reaction score 0 Mar 12, 2007 #5 I will try that.
D dr drae Well-Known Member Joined Oct 17, 2006 Messages 1,054 Reaction score 0 Mar 12, 2007 #6 What are silonods? You mean like missle silonods? :flipoff:
![20191123_145051[1].jpg](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/11/11617-c6e7ff0caaaf09d7d3914ad3d3fc5b90.jpg?1625929532)
