Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
If the pre-load was good, and you have movement with a solid spacer, then you *should* be ok just tightening, and re-staking the pinion nut. However, if the nut was loose, and even with the spacer, preload might be off now. There should be no in and out movement at the yoke. Or so a diff guy told me.
If the pre-load was good, and you have movement with a solid spacer, then you *should* be ok just tightening, and re-staking the pinion nut.
However, if the nut was loose, and even with the spacer, preload might be off now. There should be no in and out movement at the yoke.
Or so a diff guy told me.
