• Help Support Hardline Crawlers :

Reply to thread

If its trying to turn after it hits the stops, but wont reach the stops the other way (for instance), then you need to center the box, then re-index the arm on the box IMO.


As for the pins, I believe they're there to allow the shaft to telescope down in a collision so it doesnt impale you (in theroy).  So, you just melt them out so you can telescope it out longer instead.  Im not sure if you have to reweld it in place.  I wouldnt think so, I dont really see why you would need to since apparently its only plastic that holds it in place as it is.


~T.J.


Back
Top