Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I'd start with a 70U rear housing, cut down the passenger side and buy a piece or DOM for the driver side. Reid inner C's and factory GM knuckles, GM spindles and hubs,Stock 35 spline inners with Yukon 35 spline outers cut down and the snap ring groove re cut and the GM hub lathed shorter to shorten how far it sticks out of the wheel. I'd also put drive slugs and 3/4 ton brakes on it but leaving it 8 lug.Everything I listed should be easy for you to source with the network of people we both know.
I'd start with a 70U rear housing, cut down the passenger side and buy a piece or DOM for the driver side. Reid inner C's and factory GM knuckles, GM spindles and hubs,Stock 35 spline inners with Yukon 35 spline outers cut down and the snap ring groove re cut and the GM hub lathed shorter to shorten how far it sticks out of the wheel. I'd also put drive slugs and 3/4 ton brakes on it but leaving it 8 lug.
Everything I listed should be easy for you to source with the network of people we both know.
