Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
It has new output bearings and input bearing, not the internal needles, but what i dont understand also, is when i have the driveline on, and in neutral, i can wiggle, up and down, the driveline quite a bit right at the t-case yoke, but when the d-line is off it's hard to wiggle the flange to get the same movement out of it. it's weird, it's as if the t-case output is loose, but only when you get the d-line on for leverage.... maybe the CV in the d-line is bad, but something else is going on, I just dont feel there should be any play in that output...make sense?:eeek: (hard to describe on the intranets)
