We build all our own chassis, at this shop and at the Colorado store. Between the two of us we now have 8 different chassis to choice, three 48 inch 2 seaters, two 54 inch two seaters and a few different way to build a four seater like the one here. We are dealers for just about everthing between the two of us so we can give the customer about anything we wants. The customer on this built had his own motor, we build trannys at the colorado store, so we did the TH 400, I got the Stak. Customer had the axles and coilovers. We have all our own tabs and brackets cut, many to resale, some I have custom cut like the ones in this build. We buy time from a couple of different people for our cutting. We have our own bumpers and link brackets cut also. We use alot of PSC stuff but we do use others also. We also use turn Key for alot of our motors in build ups, but I jsut got tied into a deal here close that I will be offering Gen. 3 type motor for a steal, they are used but some as low as 1700 miles on them. We do alot of custom tube bending here, most of it is done by me but Grant has step up here alot the last few weeks. The phones rings here alot so I dont always have time to go in the back and walk them through it all. We set up most of our 4 links the same way, not like this four seater, so it makes it pretty easy to knock them out fast and we keep most tabs, brackets, heims and the like in stock so we dont have to wait on stuff if we have builds to do. We use alot of axle from Solid, Currie and a couple from Spyder Tracks, we set up all our own axles, gears, lockers and the like, pretty much a do it all shop, If I cant do it, I'll find someone who can and get it done. This four seater was built in Colorado by Jason at the Jimmys 4x4 store. We will have our new 54 inch 2 seat done here in a couple of weeks, if not sooner.
hands off the real woman curves type, she's mine 
I'm single and like to be diverse in my conquests. 
The customer is always right, right??
