Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Dinked around on the jeep a bit tonight with some odds and ends. One of the tasks left on the to-do list was figuring out how to get my 3/8 NPT temp sender for my elec fan securely mounted in my radiator. Been scratching my head but went down to the hardware store and found my solution.Where I wanted sender to readFound this flange which just needed a little modificationWell, a lot of modificationHooray for JB WeldThen I soldered a connector onto the sender to attach to a ground so I don't have to rely on the grounding properties of JB WeldAlso had to cut a bit more floor to clear my rear drive shaft which is now bolted in. Tomorrow once the JB Weld is cured, I should be able to put everything back together.
Dinked around on the jeep a bit tonight with some odds and ends. One of the tasks left on the to-do list was figuring out how to get my 3/8 NPT temp sender for my elec fan securely mounted in my radiator. Been scratching my head but went down to the hardware store and found my solution.
Where I wanted sender to read
Found this flange which just needed a little modification
Well, a lot of modification
Hooray for JB Weld
Then I soldered a connector onto the sender to attach to a ground so I don't have to rely on the grounding properties of JB Weld
Also had to cut a bit more floor to clear my rear drive shaft which is now bolted in. Tomorrow once the JB Weld is cured, I should be able to put everything back together.
