Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Hope temp sender bung version 2.0 works out better. I used some solid core silver solder and flux specifically for copper and cleaned/dried the area as well as I could. Picked up a cheap copper fitting and a section of thin flat stock. Then laid down a solder layer covering the area on the rad to build up a good thick platform. I tried to be as careful as possible to avoid over heating other areas of the rad.Unfortunately I don't really have a great way to pressure test so I'll just have to test it the hard way. But it looks to have pretty thick even coverage.
Hope temp sender bung version 2.0 works out better. I used some solid core silver solder and flux specifically for copper and cleaned/dried the area as well as I could. Picked up a cheap copper fitting and a section of thin flat stock. Then laid down a solder layer covering the area on the rad to build up a good thick platform. I tried to be as careful as possible to avoid over heating other areas of the rad.
Unfortunately I don't really have a great way to pressure test so I'll just have to test it the hard way. But it looks to have pretty thick even coverage.
