Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Finally got the last major piece of the puzzle done My old plastic valve cover was so warped it'd literally dump oil out without restriction. I couldn't drive the backyard for more than 10 mins without getting face fulls of smoke from oil puddling all over the block. Well, a local guy hooked me up with an aluminum jobby for the cost of shipping. Suffice it to say, I was stoked.Found this covering the inside of my old one :eeek: But the drained oil doesn't show any signs of water/coolant...Fought a bit to get the new one on. The pass side studs pulled out so I had to reset them. Had to modify the driver side hold down cap thingies. And had to cut out the old studs that went through the top of the plastic cover since the aluminum one doesn't have holes there. But I'm ecstatic to finally be rid of that plastic piece of failed abortion engineering bullshit they called a valve cover :011:
Finally got the last major piece of the puzzle done
My old plastic valve cover was so warped it'd literally dump oil out without restriction. I couldn't drive the backyard for more than 10 mins without getting face fulls of smoke from oil puddling all over the block. Well, a local guy hooked me up with an aluminum jobby for the cost of shipping. Suffice it to say, I was stoked.
Found this covering the inside of my old one :eeek: But the drained oil doesn't show any signs of water/coolant...
Fought a bit to get the new one on. The pass side studs pulled out so I had to reset them. Had to modify the driver side hold down cap thingies. And had to cut out the old studs that went through the top of the plastic cover since the aluminum one doesn't have holes there. But I'm ecstatic to finally be rid of that plastic piece of failed abortion engineering bullshit they called a valve cover :011:
