Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
So I finally decided to play with the big boys and build a buggy. Sadly I had to deliver the big truck to the scrapper before I started on my new endevor, but it was a good learning experience and welding project. So here we go...... I designed my own chassis on bend tech pro, and built a new bender that is just begging to be used. The plan is to build a custom chassis out of 1 3/4 x .120 wall tubing, 2.5 ton Rockwell axles, double beadlocks, 44in tires, 500HP 383 stroker motor, 700R4 trans mated to a 205 twin sticked, single triangulated four link with FOA 18in coilovers. I'll try to keep this updated, here are a few pics to start. :redneck:
So I finally decided to play with the big boys and build a buggy. Sadly I had to deliver the big truck to the scrapper before I started on my new endevor, but it was a good learning experience and welding project. So here we go......
I designed my own chassis on bend tech pro, and built a new bender that is just begging to be used. The plan is to build a custom chassis out of 1 3/4 x .120 wall tubing, 2.5 ton Rockwell axles, double beadlocks, 44in tires, 500HP 383 stroker motor, 700R4 trans mated to a 205 twin sticked, single triangulated four link with FOA 18in coilovers. I'll try to keep this updated, here are a few pics to start. :redneck:
