Tranny Oil???

JOOP · Jun 21, 2006

Would it be wrong to add the tranny fluid through the shifter? AX-15...

Instead of the fill plug in the side of the tranny?? It all ends up in the same place anyways, right?

CrustyJeep · Jun 21, 2006

You don't have an oil pump? Tard :flipoff:

Doesn't matter how it gets in there :;

crash2 · Jun 21, 2006

JOOP said:
Would it be wrong to add the tranny fluid through the shifter? AX-15...

Instead of the fill plug in the side of the tranny?? It all ends up in the same place anyways, right?

Its how I do it since I use red line in bottles otherwise I just use my big hand pump...

MarcW · Jun 21, 2006

hijack, how do you tell if there's enough fluid in the AX15?

CrustyJeep · Jun 21, 2006

Hey Jon........
Best $30 (shipped) you'll ever spend

http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_47667_47667

TreeClimber · Jun 21, 2006

MarcW said:
hijack, how do you tell if there's enough fluid in the AX15?

normally by when the fluid starts to come out the normal fill hole.

CrustyJeep · Jun 21, 2006

And NOT when it starts coming out of the shifter :haha:

TreeClimber · Jun 21, 2006

CrustyJeep said:
And NOT when it starts coming out of the shifter :haha:

J/K it's ok to fill it to the rim, as long as the breather tube is installed..... it'll puke the extra out and leave a big oil stain, ya know, typical Jeep stuff.

JOOP · Jun 21, 2006

Ok thanks guy's. were at that stage now to put oil in it. Almost done, just have to bleed the clutch, and put the skid mack on. We only have a few extra bolts. :redneck:

junkyard jim · Jun 21, 2006

Anyone have the tool to open the filler plug of the Peugeot trans? I need mine to last a little while longer and I think it's getting kind of dry inside (it's making those funny whiney noises. At first I thought it was my ex-wife!)

JOOP · Jun 22, 2006

Not too bad of timing today. 3 hours to get the jeep all back together. That included putting the tranny back together (bellhousing, slave cyclinder,T-case) and Replacing a U-joint (yes the same one , 15th time in the past year

)

I spoke wiht Tom woods today and hey told me about a little secret to try. Taking the caps off of a 5-1204x joint and use them. (A hair bigger) So we'll see if that fixes it. If not, Anti-wrap bar goes on and I change the yoke on my DS to a 1330.

I want to give a super thank you to Cameron for coming over to give me hand. I dont think I've ever seen him that dirty before.:redneck: