• Help Support Hardline Crawlers :

Reply to thread

Mine are autometer as well.  I said the same thing. I changed both temp sending units.  One on block and one in the trans pan.  They still read wrong.  All I can figure is they are off due to beating and banging around.  The temp laser gum is the way to go.  I shot them last year a t Harlan after the long climb to middle fork from Putney side.  The coolant was pegged out and the trans read 150*. My trans always barely reads 100*. I knew that was wrong.  When I got to middlefork I jumped out and lasered the thermostat housing and it was 190* and the trans coolant lines where like 194*.  Both gauges where way off.  I check them periodically and I`ve never seen my egine or trans over 200*..   TBI 350 and 700R4.


Back
Top