D-nAsTy-MaX
Well-Known Member
SOLD SOLD SOLD
87' SamI Buggy
-chevy 8valve 1.6liter EFI
-dual cases in extreme built cradle/mounts, flat belly
-5.13 geared built Dana 44s, Detroit lockers, front has chevy big bearing outters and drive slugs, 33 spline Dutchman chromo rear axles, new 30 spline 10factory chromo front axles,both axles are trussed and all mounts are BEEF and welded clean, 4 wheel disc brakes
-4 link rear, 3 link front, 1.25" Johnny Joints and 2"x ¼" wall DOM links, 14" front and 16" rear King air shocks custom valved by Downsouth Motorsports, works great always feels stable
-stretched frame front and rear, comp cut body, 104" wheelbase 4 wheel disc brakes
-38x12.50 tenn. cut tsl's on 15" 32bolt beadlocks
-hydro assist with PSC ram and tc pump with spidertrax pulley, nice steering cooler, scout box, and 1ton steering
-thick built hd drive shafts,
-17 gallon RCI fuel cell
-american made Ramsey 8.5k lb recovery winch, rear suspension pulldown 2k lb winch, built in front suspension pull down winch mount also just not a winch there
-professionally fabbed cage all points tied straight to frame with incorporated grab bars and harness mounts front and rear, front and rear tube stingers
-very bright LED rock lights
-led flush mount taillights, round industrial headlights, offroad lights, led quick connect turn signals
-nice leather bucket seats(formed to hold you in "snug") as well a lot of adjustment, rci wide harnesses
-rust free full exhaust tucked up high, 3" k&n air filter
-winch box and ecm relocated to firewall behind dash, clean wiring
-soft top, 2 windshields, doors with glass
-also it is set up to have a backseat where toolbox is just do not have one.
-have spare driveshaft and factory front axle shafts for spares, and a set of 38.5 15.50 15 low tread but streetable tsl's to go with it
This is a reliable and capable rig NO JUNK has clean welds and beef mounts throughout... good fabrication. It has been wheeled mostly at Golden Mountain and Harlan. It has some wheeling scars but its not a raisin. i do have the title, NEEDS NOTHING TURN KEY WHEELER
$5500 OR BEST OFFER Call or text 828 506 6070. Located in Cherokee NC
Build thread http://www.pirate4x4.com/forum/showthread.php?t=700203
Photobucket pics http://s244.photobucket.com/albums/gg25/Sawzall/
http://s244.photobucket.com/albums/gg25/Sawzall/Harlan%20KY%20August%202011/
videos: Crackhead @ Golden Mountain Continued
more crackhead at golden mt
Three buggies bang on a giant ledge at Golden Mountain OHV
87' SamI Buggy
-chevy 8valve 1.6liter EFI
-dual cases in extreme built cradle/mounts, flat belly
-5.13 geared built Dana 44s, Detroit lockers, front has chevy big bearing outters and drive slugs, 33 spline Dutchman chromo rear axles, new 30 spline 10factory chromo front axles,both axles are trussed and all mounts are BEEF and welded clean, 4 wheel disc brakes
-4 link rear, 3 link front, 1.25" Johnny Joints and 2"x ¼" wall DOM links, 14" front and 16" rear King air shocks custom valved by Downsouth Motorsports, works great always feels stable
-stretched frame front and rear, comp cut body, 104" wheelbase 4 wheel disc brakes
-38x12.50 tenn. cut tsl's on 15" 32bolt beadlocks
-hydro assist with PSC ram and tc pump with spidertrax pulley, nice steering cooler, scout box, and 1ton steering
-thick built hd drive shafts,
-17 gallon RCI fuel cell
-american made Ramsey 8.5k lb recovery winch, rear suspension pulldown 2k lb winch, built in front suspension pull down winch mount also just not a winch there
-professionally fabbed cage all points tied straight to frame with incorporated grab bars and harness mounts front and rear, front and rear tube stingers
-very bright LED rock lights
-led flush mount taillights, round industrial headlights, offroad lights, led quick connect turn signals
-nice leather bucket seats(formed to hold you in "snug") as well a lot of adjustment, rci wide harnesses
-rust free full exhaust tucked up high, 3" k&n air filter
-winch box and ecm relocated to firewall behind dash, clean wiring
-soft top, 2 windshields, doors with glass
-also it is set up to have a backseat where toolbox is just do not have one.
-have spare driveshaft and factory front axle shafts for spares, and a set of 38.5 15.50 15 low tread but streetable tsl's to go with it
This is a reliable and capable rig NO JUNK has clean welds and beef mounts throughout... good fabrication. It has been wheeled mostly at Golden Mountain and Harlan. It has some wheeling scars but its not a raisin. i do have the title, NEEDS NOTHING TURN KEY WHEELER
$5500 OR BEST OFFER Call or text 828 506 6070. Located in Cherokee NC
Build thread http://www.pirate4x4.com/forum/showthread.php?t=700203
Photobucket pics http://s244.photobucket.com/albums/gg25/Sawzall/
http://s244.photobucket.com/albums/gg25/Sawzall/Harlan%20KY%20August%202011/
videos: Crackhead @ Golden Mountain Continued
more crackhead at golden mt
Three buggies bang on a giant ledge at Golden Mountain OHV
