• Help Support Hardline Crawlers :

Reply to thread

Well I went back out and got some more done this afternoon.


Okay so I got the lights wired.

Installed.

And working.


Now in this picture I have the left turn signal on.

The LED's are from Mesa 4X4 & are the 61 LED design.


I also made a little spinner nut for my high lift jack while I was playing this afternoon.


Tomorrow I want to drop the fuel tank, swap it for a 20 gal one. I also have to run into town for a 1" hole saw to make the hole for the two lower bolts on the corners. While the tank is out I'll replace the trackbar and check everything out back there.


Back
Top