Jeepertrains
Member
- Joined
- Jan 9, 2014
- Messages
- 6
- Reaction score
- 2
Rebuilt 8274 winch, now similar to the new 10,000lb 8274-70, near new condition
A few years back I swapped out the motor for one from a 9.5xp winch, 6hp and I had an Albright Contactor mount off to the side.
I plan on selling this, so I wanted to clean it up a bit. Between the 3 winches that I was working on, one needed a new top case and another needed a new end piece. This one needed a new bottom case as I broke the brake pawl mount.
So I used all the new case parts for this winch. I installed the proper Albright from Warn (102339) for this one.
Cleaned it up, rebuilt the brake assembly and replaced all the seals.
I put WARN 102558 Spydura Nightline Reflective Synthetic Winch Cable Rope with Swivel Hook End: 3/8" Diameter x 100' Length on it and a generic fairlead.
This is now a near new 8274-70 10,000lb winch.
$2500
SW Michigan
A few years back I swapped out the motor for one from a 9.5xp winch, 6hp and I had an Albright Contactor mount off to the side.
I plan on selling this, so I wanted to clean it up a bit. Between the 3 winches that I was working on, one needed a new top case and another needed a new end piece. This one needed a new bottom case as I broke the brake pawl mount.
So I used all the new case parts for this winch. I installed the proper Albright from Warn (102339) for this one.
Cleaned it up, rebuilt the brake assembly and replaced all the seals.
I put WARN 102558 Spydura Nightline Reflective Synthetic Winch Cable Rope with Swivel Hook End: 3/8" Diameter x 100' Length on it and a generic fairlead.
This is now a near new 8274-70 10,000lb winch.
$2500
SW Michigan
