What do I need.

Jcampbell54 · Jun 8, 2013

Here is the pictures of the bottom of my mixer ( I guess) and my manifold on 22r. What do I need to adapt the two??

Sent from the mans IPhone.

patooyee · Jun 8, 2013

Either a different throttle body (Not sure what to tell you to get in that case.) or an adapter. I made the adapter for my brother's 22r years ago from scratch and it worked fine for years and years, was working fine when he sold the buggy. I'm sure Buddy will chime in shortly with a better suggestion for the TB.

Jcampbell54 · Jun 8, 2013

Ok thanks man. I'll keep searching through the forum.

Sent from the mans IPhone.

billstoy · Jun 9, 2013

I have made 2 aluminum adapters for my 22r 's . it's just 5x2" 1/4 inch plate use your bases for templates drill 4 holes for manifold 2 holes for the mixer and a hole saw for throttle hole! cost 5$ and 2 hours or you can buy the proper factory one for about 150$ :afro: by the way that picture is a weber adapter on a 22r manifold . you can sell the adapter for about 25$ !! I have one I just made ready to run for 50$ with hardware. I'll just make another! I'll text pictures if needed!

Jcampbell54 · Jun 9, 2013

That's kind of what I thought. It seems the mixer has the carb built into it. I made a plate last night but not sure if it would work. The way it looks I won't need a toy carb base plate with the setup I have.

Sent from the mans IPhone.

Jcampbell54 · Jun 11, 2013

Any ideas?

Sent from the mans IPhone.

85toyo · Jun 11, 2013

Jcampbell54 said:
That's kind of what I thought. It seems the mixer has the carb built into it. I made a plate last night but not sure if it would work. The way it looks I won't need a toy carb base plate with the setup I have.

Sent from the mans IPhone.

You may be thinking of a gotpropane kit. He uses the Toyota throttle body with a adapter plate to go to the mixer. In this case it looks like you just need a adapter to go from the manifold to mixer. The only thing im not to sure about is where you would connect your pcv valve since they connect to the original throttle body.

Jcampbell54 · Jun 11, 2013

I already have it run down to the bottom of the motor with a filter since it likes to blow a little oil lol. I'm going to give it a shot the way it sits. It also looks like it has some sort of vacuum choke type deal. Not sure about it. Haven't seen anyone else running it.

Sent from the mans IPhone.

HotwheelsYJ · Jun 11, 2013

Re: Re: What do I need.

Find a friend @ a machine shop. I made this one for Birddog's yota buggy 7-8 years ago

KyTrash · Jun 11, 2013

Re: Re: What do I need.

:dblthumb:

HotwheelsYJ said:
Find a friend @ a machine shop. I made this one for Birddog's yota buggy 7-8 years ago

Jcampbell54 · Jul 7, 2013

Anybody know somewhere around Columbia TN that makes propane hoses? I've found some that will work but don't want to use grill propane line or hydraulic line.

Sent from the mans IPhone.

billstoy · Jul 7, 2013

call your local propane co. and ask,, here in chattanooga walter A woods! supply...

Jhouser · Jul 8, 2013

Jcampbell54 said:
Anybody know somewhere around Columbia TN that makes propane hoses? I've found some that will work but don't want to use grill propane line or hydraulic line.

Sent from the mans IPhone.

Columbia rubber and gasket can fix you up with everything you need.