who needs some 1 ton 4x4 **** from KS

blacksheep10 · May 20, 2010

I might have to come to Bham/ATL to pick up a chassis for a friend, and swing to ORI to train to be a rebuilder
To finance the trip I need to sell some stuff
HP 60 center with no c's, 4.10's open, $400 neg
1999 50 front with stock ford dually spacers and the Super Duty steering box and all steering rods, no unit bearing hubs. stealing those $200
lots of 205's and ****, 4 speeds, 400's,
14 bolts galore
H1 wheels recentered 8 lug, could have my old cut 44's on them if needed
406 mog parts :flipoff1:

flat top knuckles, tons of 44 stuff, make me not scrap it
driveshaft stuff, 1410 2 piece stuff, 1350 complete shaft stuff, etc
Gawd knows what else, just lots of ****
Kelly

onetoncrawler · May 20, 2010

are the 1350 shafts straight? balanced? let me do some measuring tonight and i will get back with ya tomorrow on those

InittowiniT · May 20, 2010

gear ratio on the 50

blacksheep10 · May 20, 2010

onetoncrawler said:
are the 1350 shafts straight? balanced? let me do some measuring tonight and i will get back with ya tomorrow on those

Ha, I mean stock takeouts that are tight in the spline that I build for people. I normally retube and hit the trail.

blacksheep10 · May 20, 2010

InittowiniT said:
gear ratio on the 50

Damn, I'll have to check. Its like 45 minutes away at the moment.

lay · May 20, 2010

If u can load up that comp buggy u got and I'll take it off your hands :flipoff1:

Juan_Hong_Loe · May 20, 2010

Cole might need that ford 60 center with 4.10's. He might need a 14 bolt or two.

race_jeep · May 20, 2010

I Need 2 1350 205 yokes, 32 spline :dblthumb:

wizzo · May 20, 2010

how much for a th400

Blake · May 20, 2010

Do you have a 6 bolt round pattern 205?

HotwheelsYJ · May 20, 2010

Any chance you'll be coming close to Chattanooga with a SRW 14 bolt?

blacksheep10 · May 20, 2010

Juan_Hong_Loe said:
Cole might need that ford 60 center with 4.10's. He might need a 14 bolt or two.

I could throw in a shave kit (think I have 1 left) and some disc brackets.

race_jeep said:
I Need 2 1350 205 yokes, 32 spline

honestly not looking to part the 205's as I would have to buy a new yoke then. I have like 3 or 4 32 spline slip rears and a shortage of fixed yoke rears, so a shortage of yokes. If I have to buy them they're like $50

wizzo said:
how much for a th400

I have 1 that I need to not sell, but anything is up I guess. It is a jasper that was solid as a rock, I gave $265 for it. I'm planning on putting it in my Pink truck, but would sell I guess. Other than that, I have several 400/205's complete, most have cooked trannies though.

]I've sold the only 2 I've ever had pretty much as soon as I got them laughing1

HotwheelsYJ said:
Haven't looked at where Chatanooga is, but I think I'm running through the Ham and over(unless there's a better route.)

I think I have 3 14 bolts I'd let go of. 2 are 3.73, 1 is 4.1.

lay said:

If u can load up that comp buggy u got and I'll take it off your hands

Click to expand...

ha, gonna build it, unless you have 4 grand you need to get rid of.

COPPERHEAD42 · May 20, 2010

i need the 1410 2 piece d shaft parts and you dont even got to leave paola :woody:

blacksheep10 · May 20, 2010

COPPERHEAD42 said:
i need the 1410 2 piece d shaft parts and you dont even got to leave paola

I snagged 3 and plan on getting more.

PABLOPICASO · May 20, 2010

Hey I need a 205 from behind a 400, how much are you asking?

KXCRAWLER13 · May 20, 2010

i need some 1410 shaft parts to if he dont take them all call me ill meet ya

cash talks · May 20, 2010

is this discussion or for sale :flipoff1:

Juan_Hong_Loe · May 21, 2010

how much just for the steering box?

blacksheep10 · May 21, 2010

KXCRAWLER13 said:
i need some 1410 shaft parts to if he dont take them all call me ill meet ya

I think I have 1 more after he gets what he needs. Its a whole shaft with bolt on yoke and stock carrier still there with the rubber cut off. Bolt in pillow block and rock out. One might be bent in half and the other might have the weld yoke chomped off. The pillow block/yoke part is solid on all 3 or 4 of them I have.

Juan_Hong_Loe said:
how much just for the steering box?

left a message this morning. We'll work something out.

blacksheep10 · May 26, 2010

well crap, some things fell through. Matt O I need to get together with you to get the links. I'm coming from ATL to T town sat night before dark
Cole, I know you need a 14 bolt, cough up some cash ninja :flipgotcha:

crap, just getting texts back now, everyone is out of T town for the long weekend, guess Hot Springs might have to get pushed into early morning Sunday, only 9 hours!