Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
For what it's worth this is how mines mounted. Sorry for crappy pictures. But both of my cross members are bolted solid to the factory frame rails.. Not sure if you can see but the transfercase foot is mounted on factory style poly bushings the home made transfercase support is mounted with poly bushings and I have the same style poly bushings on my motor mounts. When my trans broke I didn't have any rear support on my 205 and the adapter bolts worked loose witch caused my case to bust. It actually broke one of the ears off the back of the case but we welded it all back up solid drilled it out and help coiled it. It's been over a year and I've been good to go. I'm wondering if where your cross member is poly mounted if you couldn't bolt your transfer to it solid. There would still be give at the side mounting points. Good luck and I hope you get this problem taken care of.
