• Help Support Hardline Crawlers :

Reply to thread

Yes.  Where are there 5 wires through?


You can mount the Solenoid just about anywhere especially if you ditch all of the crap its mounted in.   On the Solenoid there are three blades.  Effectively a forward, neutral and reverse. 


I wired them up to an On-Off-On toggle switch. 


Or maybe I just had a oddball solenoid.  Sorry dont have the solenoid number Daniel should have it though as I had to replace it once from him. 


In this pic the three blades are on the bottom of the solenoid.  And you can see the Blue middle connector is the ground that I attached to a screw on the top of the chassis mount for the solenoid. 

[ATTACH=full]156352[/ATTACH]


Latest posts

Back
Top