Wiring Harness conversion ?

[Rcbro]

Hey Guys, Been awhile since i've been on the forum, but Im hoping some of you may have heard of this place and have some opinions on it.

I'm in the process of putting in a 22RE engine in my 80 toyota. The 22RE harness and ECU are from an 1987 toyota automatic.

While doing some part searching on craigslist I came across a guy advertising he does a 4 wire harness conversion for most engine conversions under the name Fuel Cell Power. So I shot him an e-mail to see if he could possibly do a conversion for me. Cost is right, but it seems alittle to simple so I wanted to get some opinions.

He says the harness will be a 4 wire setup and can be wired into any host vehicle. The 4 wires consists of 12V, Ignition, fuel pump and engine light. The 4 wires interphase with the vehicle and the ECM hadles the EFI trough the factory wiring harness.

What do you guys think?

 

[super samurai]

what is the price?
i have done a few myself and am curious the price some one will charge.
my wiring is a 4 or 5 wire, 1 or 2 grounds and 3 power wires.
this will go in any rig and still be able to use all your stock functions, ie, starting etc.

where are ya located?

 

[Rcbro]

Price is $250, I'm located in Salem

 

[super samurai]

It is not that hard to do, just be patient. I am to far away to be any help, sorry. Ir you were closer id do it for half.

 

[Rcbro]

I have access to everything I would need when it comes to automobile wiring. My issue is trying to decipher what is what on the harness.

I cannot find a suitable source for the harness I have and i'm not familiar with how the motor itself works and what it needs and doesn't need.