Here's some really crappy pictures from last week.
This is a top view (taken sideways) of that bracket Advanced Adaptors supplied
Here it is from the bottom
And here's how it looks with the shifter kind of mocked in place (drivers seat view)
I really needed help to get the shifter to sit correctly. So it sat around for a week...
Finally I got some much needed help and enthusiasm. I needed to cut a piece from the factory shifter bracket off and it sits in there much better!
I still may have to bend the shifter lever some, but it sits in there much better.
Yesterday I was able to get the help I needed with some coolers too.
We mounted the power steering and transmission cooler right behind the jeeps grill.
I also got help in building a little bracket to mount the transmission dipstick. So I took a picture of the welding of the bracket, but not a picture of the finished work. (It looks good!) I'll take that picture tomorrow and start the next post with it.
So here's the before pic...
Today I went out and bought the hoses for the coolers and extra 'emergency couplers & hose clamps'. I also got a 3' x 3' sheet of aluminum. My partners in crime seem to think we'll build a pretty baddass fan shroud out of it... We'll see... :corn:
