BII Gansta

CHOP SHOP · Jun 1, 2009

CHOP SHOP said:
Its going to get a cage around it and lose the front fenders I think.

Yup, it got a cage and lost the fenders this last weekend.:corn:

Bunk1 · Jun 1, 2009

CHOP SHOP said:
Yup, it got a cage and lost the fenders this last weekend.:corn:

ics:

Totalled · Jun 6, 2009

:corn:

CHOP SHOP · May 18, 2010

So mothers day came around. and it was either take her to breakfast or work on this damn BII, well BII work was cheaper than Bfast, so you know which one I picked.

I think she worked harder than me tho!:redneck:

And yes the other end of that tree is sticking out the front, over the diff and under the pan! :haha:

CHOP SHOP · May 18, 2010

put a set of belltech shackles on it. Also swapped out the old owners aluminum lift blocks for some cast iron ones.

The internet taught me that long shackles and lift blocks were all wrong, so we installed them ASAP.

The ol lday is getting good at the tool part.

CHOP SHOP · May 18, 2010

Then the poopy stock axle came out. :cheer:

bigdog165511 · May 18, 2010

I have a full b2 cage badass HD sliders and tube doors
all for $400 will seperate if needed if interested
:awesomework:

CHOP SHOP · May 18, 2010

Cleaned up the ol Bronco 9 inch and put a couple new perches on it (actually old perches I cut off something else).

CHOP SHOP · May 18, 2010

bigdog165511 said:
I have a full b2 cage badass HD sliders and tube doors
all for $400 will seperate if needed if interested
:awesomework:

Please, dude. Thats more than the whole budget.:kissmyass::haha: But thanks.:beer:

She already got an old cage cut off an old wheeler for free. I will continue to weld free scraps to it.

WHITE TRASH1 · May 18, 2010

Better double up those rear main leafs.... I've bent a couple sets of them, they flex extremely well but the large void between the main and second leaf is a guaranteed place they will bend.

What ratio is that original rear end? If it's 4.10 I may have a use for it..

CHOP SHOP · May 18, 2010

heres a sneaker. Pure baddassness. :bananallama:

CHOP SHOP · May 18, 2010

WHITE TRASH said:
Better double up those rear main leafs.... I've bent a couple sets of them, they flex extremely well but the large void between the main and second leaf is a guaranteed place they will bend.

What ratio is that original rear end? If it's 4.10 I may have a use for it..

what were ya running them on? heavier than this thing?

Old rear is 3.54s, its $free.99 if ya want it.

New rear is 4.10. She got the rear for $50 (thanks super sami Brian) a locker off of CL for $75 and the 4.10 third for $75.

$200 for a narrow old bronco 9 inch with gears and a locker aint to bad.

At least I know she can always part it out and be ahead still.

WHITE TRASH1 · May 18, 2010

I had them on my gutted yota before the cage, bumpers etc etc. They are just weak... You can always replace the main with one from a F series and cut the stock main for usage as a second leaf. That'd work perfect and the main would last forever.

I already have one with poopy 3.54... I need to lift my 2x ranger, poor thing is about worthless with 235's on it. :haha: Thanks anyway.

MarcW · May 18, 2010

cool B-rad. Allways making something outta nothin

Fordzuki · May 18, 2010

I like the lines on the cage. Looks kinda like a Yugo. :awesomework::redneck:

Totalled · May 18, 2010

Explorer rear main leaf with BII leaves...

PS, I think you put the shackles on backwards, unless the sideways pic is deceiving.

PPS, them be 3.45 gears. RBV noobs. :shaking::flipoff:

CHOP SHOP · May 18, 2010

Totalled said:
PS, I think you put the shackles on backwards, unless the sideways pic is deceiving.

good eye. The old stock ones were the same way. Ill have to look and see if its going to interfere. :awesomework:

Dubshot · May 19, 2010

nice, I was thinking of swapping my 79 bronco in a b2. You looked like the devil standing behind that thing! I still need them d-shafts mades ill hit you up tomorrow :corn:

CHOP SHOP · May 19, 2010

Dubshot said:
nice, I was thinking of swapping my 79 bronco in a b2. You looked like the devil standing behind that thing! I still need them d-shafts mades ill hit you up tomorrow :corn:

Im pure evil. :FIREdevil: