Sandtrap1986
Well-Known Member
just let me know Mike :beer:
-
Help Support Hardline Crawlers :
Chris's toy (Sandtrap1986)
- Thread starter crash2
- Start date
crash2
-Oh no I picked a side-
So I threw the vcm in yesterday--and the damn thing barely turns over---after some checking the starter has went south 
I grabbed one today but I got home too late and will spend tommorow evening trying to get it ready..
I grabbed one today but I got home too late and will spend tommorow evening trying to get it ready..
stealthrunner1
Well-Known Member
So I threw the vcm in yesterday--and the damn thing barely turns over---after some checking the starter has went south
I grabbed one today but I got home too late and will spend tommorow evening trying to get it ready..
That's the Crash I know!!!! Always helping his Fellow wheeling Brothas!!!:awesomework:
WA-Wheeler
Well-Known Member
Those damn Chevotas!!!! Always given people grief :redneck:
stealthrunner1
Well-Known Member
Yep when you cross breed a yota and a chevy you will have a double problem!!!!:awesomework: LOL don't ask me how I know!!!!!!:haha::haha::haha::beer:
Sandtrap1986
Well-Known Member
So I threw the vcm in yesterday--and the damn thing barely turns over---after some checking the starter has went south
I grabbed one today but I got home too late and will spend tommorow evening trying to get it ready..
Man I cannot catch a break .....that thing did look old though
crash2
-Oh no I picked a side-
Just trying to make things as perfect as they can be....
crash2
-Oh no I picked a side-
son of a-------------------------.....
So I got the starter/vcm all installed and it was running perfect--no codes no nothing. After an hour the damn light came back on.
By this time I am fully agravated. So once again I go over every inch of my work and about midnight I verified my stuff and decided to check the camshaft sensor that I had replaced a few months back---no output.
Are you kidding me--fawk me. So ya about 1am I finally walked out of the shop..
So they are out of them but go ahead and pick it up tonight chris so you can get to getting it finished up--and we can deal with that at a later date(easy to do)...
So I got the starter/vcm all installed and it was running perfect--no codes no nothing. After an hour the damn light came back on.
By this time I am fully agravated. So once again I go over every inch of my work and about midnight I verified my stuff and decided to check the camshaft sensor that I had replaced a few months back---no output.
Are you kidding me--fawk me. So ya about 1am I finally walked out of the shop..
So they are out of them but go ahead and pick it up tonight chris so you can get to getting it finished up--and we can deal with that at a later date(easy to do)...
Sandtrap1986
Well-Known Member
So is the old vcm still bad? Do I need a new can shaft sensor ? I will be out there tonight mike should I bring a trailer ? And what time ?
crash2
-Oh no I picked a side-
No the ecm was bad--its just a cheap cam sensor that dropped dead..
Oh ya--you need to get the front done up before any long drive times...
If ya can about 7:30ish...
Sandtrap1986
Well-Known Member
Got it see you there
crash2
-Oh no I picked a side-
Grabbed one from work--all is good now.....
crash2
-Oh no I picked a side-
crazybluerider1
Well-Known Member
I think I just broke my neck.:fawkdancesmiley:
Sandtrap1986
Well-Known Member
Can't wait for the weekend to get my bobby's in
zukkev
Cornfuzzled yet again...
Smart fone fail!!! :fawkdancesmiley: :haha:
crash2
-Oh no I picked a side-
son of a :fawkdancesmiley:
Sandtrap1986
Well-Known Member
Attachments
ain'tstuckjustresting
RIP Mister 12/5/12
Looks good! :awesomework: Let's hit the Busy backwards..............:redneck:
Sandtrap1986
Well-Known Member
As soon as I get all the fancy stuff thrown back in .... I'm going to put the tranny to the test.... See if those particles that we found in the pan were important
