Newbies Post Up Here - Rig Specs & Info Thread

I have been on and off this forum for a couple of years. Mostly advertising WFTW rides that I was organizing at Riverrock etc. Dont believe I ever posted here.

Last rig was a 84 CJ7 with 60's, coilover,and 39 Irocs Current rig in process is M&M Offroad 4 seat chassis #19,with 6.0/4L80e, 60/14 suspended by 14" ORI and rolling on 42" Pitbulls.

Pineygroveoffroad said:

Noob, Shane from Somerset Ky, current rig Elderfab tube buggy 2seater, 4link fr&r, fj40 axles tg dirty30 fr Lincoln lockers, psc hydro steer, ecotec 2.2 engine adapted to yota 5spd, yota case w/ tg4.7 gears, 106"wb, 38.5/11/16.5 boggers cut, twf 8bolt h1's with pvc insert, rig weighs 2600lb, sorry only current pics are on my iPhone are to large to load.

Click to expand...

I'd recommend using Photobucket or another similar photo sharing site.

My turd. One tons weled front and rear. Full hydro on 40s

i like ur ram charger!!!!

Thank ya not quiet done yet cutten rest of the top off and doving both ends

89 w150 short bed, tbi318, 727, 241 transfer, 229,500 miles. Dana 60, 14 bolt, 4.56 gears, 1350 drive shafts, grader ball rear with 2.0 fox shocks, 4 inch softride leafs front, hydro steer, DIY beadlocks, 40s, delay wipers.

Can only post one at a time.

3

Still working on cage.

Dumb question but what yoke are you running on your 241 .

1350 for a 205 on the rear. You have to use a different seal. Got this one from 6 States. They have been backordered. Nobody else had any.

im cameron. this is my POS 4runner



and my other rig

Hi my name is Randy and I'm from Hayden, AL. I'm new to hardline but I've been active on several other forums such as tor,caos, lxforums, cumminsforum and of course I used to visit pirate years ago. I've never had a major crawler or bouncer but I'll give yall a list of the rigs I've had and what I've got now. Pretty much always used a dodge truck as a driver/wheeler. 1st vehicle I ever bought myself was in 99 when I graduated high school and it was an 86 Dodge W150, it was stock with 31" bfg at's, it progressed into a 4" sj lift w/35's trimmed fenders and welded rear. 2nd vehicle I bought and first brand new one I bought was an 01 Dodge Ram 1500 reg cab off-road package which comes stock with 4.10's trac locks f&r and 32's. It ended up with 3" rancho susp lift and 3" body lift to clear the M/T challenger 15x10 w/35-12.50 M/T baja claw radials. Then I got away from 4wd's for a few years. In 06 I bought a brand new Power Wagon 6-spd and put on a 6" superlift rockrunner kit and 20x10's w/37-12.50 super swamper SSR's. I drove/wheeled it for a couple of years before getting away from 4wd's again. The next 4wd was the first and only 4wd I've never taken in the woods. It was a 92 ram charger that was so clean and nice I couldnt bring myself to do it plus by this time I was around 27-28 so I guess I was starting to mature a little. I sold it and took a break again until recently. About a month ago I bought an 01 ram 1500 qc. I've still got the susp and body lift from the 01 I bought new back in 01. Plus I've still got the 15x10 M/T challengers so I'm putting the lifts on and ordered some 35-12.50 pro comp mt's for it. I've also got 4.56's and a trac lock for the rear. So I'm gonna order 4.56's for the front, weld it and put a cable actuator on instead of the factory vacuum actuator.

Sorry for the long post and all the details, it's just what I do.

ridered3 said:

I'd recommend using Photobucket or another similar photo sharing site.

Click to expand...

Thanks for the pic info

Wheres the pics at moparan

dodgecrawler2011 said:

Wheres the pics at moparan

Click to expand...

I'm working on getting home internet again. When I do I'll come backand post some pics. I'm gonna try to post some pics of the current ride tomorrow. The earlier vehicles mentioned I'll have to scan old printed photos. Here's a list of the other Mopars I've owned or currently own. It all started with my Grandfather giving me an 81 D150 when I was 15, I'm 31 now and still have it. I'll post some current pics of it tomorrow as well. I'm gonna try to keep these in somewhat of order purchased.
86 W150 318 rcsb, 01 1500 360 rcsb 4wd, 87 Chrysler Conquest TSi auto, 02 1500 360 rcsb 2wd, 04 1500 HEMI qcsb 2wd, 68 Charger R/T 440 727 (real XS29 R/T w/fact air), 06 Power Wagon, 97 2500 V10 5-spd qclb 4wd, 03 2500 HEMI qcsb 4wd, 07 Charger R/T w/r&t package, 04 PT Cruiser turbo (fully built custom when I got it), 09 Challenger R/T 6-spd, 92 RC 318 4wd, 06 Magnum SRT8 (full custom built motor, trans, rear end, susp and brakes), 11RAM 3500 6.7 Cummins auto drw cclb 2wd, 2 different 05 Magnum R/T's. Those are all previous. I currently have: 81 D150, 03 Durango 360 2wd, 02 3500 qclb 5.9 Cummins built auto 2wd and 01 1500 qcsb 360 4wd. Only vehicle out of all these to stay completely bone stock is the 03 Durango. Everything else was modded or some completely customized by me or before I got them.

Here's a peek at my 81. The wheels in the pic are now on my 01 w/35's on them.

Here are pics of how my 01 sits currently. It only has 3"body lift right now. Was gonna put on 3" susp lift but thinking about just doing a 2" leveling kit in the front and new shocks f&r. Those are 15x10 w/35-12.50





I've only got about $2300 invested in it so far. When I'm done with gears and all I should still have 3k or less in it.

New Vendor here! Dave of Daves Offroad Supply here, just wanted to introduce myself, let you guys know a little about us and show some support for a semi local forum.

We have over 12 years of experience in the sport of Offroad Driving & Offroad vehicle mondification. Whether you are upgrading your Daily Driver or your Extreme Offroad Buggy our knowledgeable staff can help you with all your 4x4 needs and find you the right parts for your project.

Daves Offroad Supply, we are located in Nazareth PA.
Check out our website at www.davesoffroadsupply.com
Ph is 484-554-3584
Email is [email protected]

Picture of my old YJ


New Buggy....work in progress

Whats up fellas..Names Eric live in the oh so great state of MI

Building a 76 cj5 stretched to 110..40's,350/350/205,3/4 link on WJ coils